Posts
3
Questions
5
Dear all:
Anyone knows what is Google Analytics ASYNCHRONOUS tracking code and how to using it / activate it?
Regards, Mike
it would be the UA followed by numbers you got when you signed up for Google analytics.
You can add it your dashboard in All in One SEO
as seen in this screenshot
http://screencast.com/t/zNNrbZ1o
you can also look at this training to finish up with webmaster verification How to Verify Site in Webmaster Tools Without Adding html to Header
Thanks Angela, Good info, I am not that far along in the classes yet, what Mike was asking about sounds kind of important, and something I should know!!! Now I have an inkling anyway! Appreciate that! Cheers Dave : )
Hi Angela!
Your training "How to verify site in Webmaster Tools without adding html to header" helped me on target.
Thanks a lot for sharing and also for publishing such a simple tutorial.
Best regards,
Mike
Hi David!
One of these days you are going to need this. Make this link a favorite How to Verify Site in Webmaster Tools Without Adding html to Header and also see this partial training from Kyle, Setting Up Google Webmaster Tools Best regards,
Mike
See more comments
Anyone knows what is analytics asynchronous tracking code?
Dear all:
Anyone knows what is Google Analytics ASYNCHRONOUS tracking code and how to using it / activate it?
Regards, Mike
but you can activate it directly, just copy it and paste in your footer.php just before </body> </html>
Hi Charlotte!
I do not like to mess with PHP code, that is why I asked the community some other solution.
Thanks for your help.
Best regards,
Mike
it would be the UA followed by numbers you got when you signed up for Google analytics.
You can add it your dashboard in All in One SEO
as seen in this screenshot
http://screencast.com/t/zNNrbZ1o
you can also look at this training to finish up with webmaster verification How to Verify Site in Webmaster Tools Without Adding html to Header
Thanks Angela, Good info, I am not that far along in the classes yet, what Mike was asking about sounds kind of important, and something I should know!!! Now I have an inkling anyway! Appreciate that! Cheers Dave : )
Hi Angela!
Your training "How to verify site in Webmaster Tools without adding html to header" helped me on target.
Thanks a lot for sharing and also for publishing such a simple tutorial.
Best regards,
Mike
Hi David!
One of these days you are going to need this. Make this link a favorite How to Verify Site in Webmaster Tools Without Adding html to Header and also see this partial training from Kyle, Setting Up Google Webmaster Tools Best regards,
Mike
See more comments
There are a handful of 4.2.2 WordPress Favicon plug-ins available, and most of them do not work at all with my WA site. Can I have your help, dear WA members, and advice me one
You can do it manually without a plugin, if you are game to try it. I replied to Robin at the post below explaining how to do it and she got it done. Why doesn't favicon show on the pdf linked to my site? Also, have you seen Marion's lesson here (she uses the All in One Favicon plugin). Create a Favicon - What is a Favicon? ~Jude
Thanks! One more thing to take care of, this is a small thing (literally) but I agree, looks more professional! Great info!
Hi Jude!
Thank you for your help about Favicon. I read a few weeks ago Marion's post about builting a Favicon.
I am in a later stage, I already had a working one in my site, but it was not visible in all devices. That is why is asked for help, trying to find in the community someone that use a plugin that works in every platform, web, tablet, mobile phone, and also with the different browsers.
Regards,
Mike
Thanks for searching my site Jude. I am using Custom Favicon for my WA site (in Portuguese), and for my niche site I am using the native Favicon builder from the Theme I'm using.
Regards,
Mike
See more comments
Do you know what is the best wordpress favicon plug-in?
There are a handful of 4.2.2 WordPress Favicon plug-ins available, and most of them do not work at all with my WA site. Can I have your help, dear WA members, and advice me one
You can do it manually without a plugin, if you are game to try it. I replied to Robin at the post below explaining how to do it and she got it done. Why doesn't favicon show on the pdf linked to my site? Also, have you seen Marion's lesson here (she uses the All in One Favicon plugin). Create a Favicon - What is a Favicon? ~Jude
Thanks! One more thing to take care of, this is a small thing (literally) but I agree, looks more professional! Great info!
Hi Jude!
Thank you for your help about Favicon. I read a few weeks ago Marion's post about builting a Favicon.
I am in a later stage, I already had a working one in my site, but it was not visible in all devices. That is why is asked for help, trying to find in the community someone that use a plugin that works in every platform, web, tablet, mobile phone, and also with the different browsers.
Regards,
Mike
Thanks for searching my site Jude. I am using Custom Favicon for my WA site (in Portuguese), and for my niche site I am using the native Favicon builder from the Theme I'm using.
Regards,
Mike
See more comments
I've inserted the Site Rubix WebSite Plugin code in the page I want and I saw it once after publish.
I hat to delete de code for some reason and now that I have the page f
I am having a similar problem...
I attempted to add this and went through the process; it created the html. I saved and updated, but when I previewed it--the button I created didn't show. Appreciated any help. Thanks
You won't see it in the editor, but you should see it when you look at it on the web.
Have you pasted the code correctly into your website in Text mode, with no extra spaces or characters inadvertently added?
Also, make sure that the width on your site is enough to accommodate the width included in the code.
Try adding it with the above in mind, and if you give me the link to your site, I can take a look. ~Jude
Hi Jude,
Thanks a lot for your answer.
I know I do not see it in the editor, just a blank grey window with a small icon in the center.
I've pasted the code correctly and tried several times in different part of the same page and in other pages too, without luck.
The width is also correct so it can accommodates even larger sizes.
I will send you the link later because now I removed the code from the page.
Thank you again.
Mike
Hi Jude,
A few minutes ago I replaced the page I talked about and now the code for SiteRubix is there. The banner is not appearing as I told before. Because my site is in Portuguese, my native language, to locate the place where the image should appear, you can scroll down the page and locate the text in blue "Built it Now". Below there is a big space with the banner dimension, but NO banner.
Here is the link:
http://comoganhardinheirohoje.com/construa-o-seu-site-gratuitamente
Thanks in advance for your help.
Best regards,
Mike
Mike,
Do these 2 things:
1. Remove the < p > tag before and after the < iframe > tag, while in text mode.
2. Change the width in the code from "600" to "550". Save it.
See if that makes a difference. Post again to let us know.
~Jude
Hi Jude!
It is working now. I followed your instructions and it worked instantly.
After I made several modifications to the banner size and worked all the time. Now the banner is 645 pixel width, and it works too.
I do not understand what was the real problem.
Thanks a lot for your advice.
If you need something that I could help, please do not hesitate and ask. If it is in my knowledge field, I will share.
Best regards,
Mike
Let's hope it sticks this time! If it happens again, it might be the way your site handles javascript code but I don't know the remedy. ~Jude
Hi Jude!
I noticed that most of the times when I made some page modification and publish it, the banner goes away.
To make it appear again, I have to delete the HTML code for paragraph,
Do not know the source of the problem, but with your help found this work around.
Best regards,
Mike
Hi Simon!
Thanks a lot for checking my site.
I do not know why this is happening, but I found if we refresh the page, the SiteRubix banner appears by miracle.
Do you have any idea why is this happening?
Best regards,
Mike
I have the same problem, I opened up a ticket with support and they just asked me to reset my theme to default, will PM you to tell you what happened.
See more comments
Why my site rubix website plugin is not appearing?
I've inserted the Site Rubix WebSite Plugin code in the page I want and I saw it once after publish.
I hat to delete de code for some reason and now that I have the page f
I am having a similar problem...
I attempted to add this and went through the process; it created the html. I saved and updated, but when I previewed it--the button I created didn't show. Appreciated any help. Thanks
You won't see it in the editor, but you should see it when you look at it on the web.
Have you pasted the code correctly into your website in Text mode, with no extra spaces or characters inadvertently added?
Also, make sure that the width on your site is enough to accommodate the width included in the code.
Try adding it with the above in mind, and if you give me the link to your site, I can take a look. ~Jude
Hi Jude,
Thanks a lot for your answer.
I know I do not see it in the editor, just a blank grey window with a small icon in the center.
I've pasted the code correctly and tried several times in different part of the same page and in other pages too, without luck.
The width is also correct so it can accommodates even larger sizes.
I will send you the link later because now I removed the code from the page.
Thank you again.
Mike
Hi Jude,
A few minutes ago I replaced the page I talked about and now the code for SiteRubix is there. The banner is not appearing as I told before. Because my site is in Portuguese, my native language, to locate the place where the image should appear, you can scroll down the page and locate the text in blue "Built it Now". Below there is a big space with the banner dimension, but NO banner.
Here is the link:
http://comoganhardinheirohoje.com/construa-o-seu-site-gratuitamente
Thanks in advance for your help.
Best regards,
Mike
Mike,
Do these 2 things:
1. Remove the < p > tag before and after the < iframe > tag, while in text mode.
2. Change the width in the code from "600" to "550". Save it.
See if that makes a difference. Post again to let us know.
~Jude
Hi Jude!
It is working now. I followed your instructions and it worked instantly.
After I made several modifications to the banner size and worked all the time. Now the banner is 645 pixel width, and it works too.
I do not understand what was the real problem.
Thanks a lot for your advice.
If you need something that I could help, please do not hesitate and ask. If it is in my knowledge field, I will share.
Best regards,
Mike
Let's hope it sticks this time! If it happens again, it might be the way your site handles javascript code but I don't know the remedy. ~Jude
Hi Jude!
I noticed that most of the times when I made some page modification and publish it, the banner goes away.
To make it appear again, I have to delete the HTML code for paragraph,
Do not know the source of the problem, but with your help found this work around.
Best regards,
Mike
Hi Simon!
Thanks a lot for checking my site.
I do not know why this is happening, but I found if we refresh the page, the SiteRubix banner appears by miracle.
Do you have any idea why is this happening?
Best regards,
Mike
I have the same problem, I opened up a ticket with support and they just asked me to reset my theme to default, will PM you to tell you what happened.
See more comments
but you can activate it directly, just copy it and paste in your footer.php just before </body> </html>
Hi Charlotte!
I do not like to mess with PHP code, that is why I asked the community some other solution.
Thanks for your help.
Best regards,
Mike