Posts
0
Questions
6
Hello all,
Does anyone know how to adjust line spacing within Site Content/Editor? As I write out my content and edit it along the way by adjusting the line spacing to sprea
I'm not positive, but I don't think you can change the setting in Site Content.
I remember, in the beginning, I used to do what you're doing, then realized all my work went out the door when I published it on my website.
Now, I don't worry about it and do all my editing in Wordpress. It saves me loads of time, lol.
Good Luck,
Suzanne
See more comments
How to auto line space in site content editor?
Hello all,
Does anyone know how to adjust line spacing within Site Content/Editor? As I write out my content and edit it along the way by adjusting the line spacing to sprea
Stop using the Enter key except for the end of a paragraph. Just keep typing and let the line endings happen automatically.
I'm not positive, but I don't think you can change the setting in Site Content.
I remember, in the beginning, I used to do what you're doing, then realized all my work went out the door when I published it on my website.
Now, I don't worry about it and do all my editing in Wordpress. It saves me loads of time, lol.
Good Luck,
Suzanne
See more comments
Hey everyone, I setup an email domain to be fowarded to my gmail account but I don't show that it worked when I checking my inbox when sending a test run. Can anyone help? also
whan you send a new mesage from your gmail account you should be able to drop down a box for the sender and select the other emails address.
if not then goto your accounts and check that this has been setup as a sender address - add it if not and you should be able to send from there.
so when you can drop the sender box down you can send yourself a test email
note the dropdown only appears in hte standard view - in the html you will reply to the email and it will apear as sent from your sites address
good luck
phil
Thanks Phil, I was able to figure that out and set that up. However how do I log into my domain email that I own that I setup within the WA platform as I only have it setup as a forward to my gmail account since you cant have the webmail box and a forward at the same time. Please let me know if you have any info on this and thank you for responding.
Michael
Michael, if you setup an email foward it is a virtual email - so you cannot login anywhere.
it is a bit like a redirection.
this is one reason i tend to setup a proper email and import the settings into my gmail - but i can log in on the wa platform if need be.
oh I see, so I can setup the actual webmail box, and then do the settings to access that email account from gmail? if so, how do I go about that coz as of now I have it setup as a forward only.
Nevermind Phil. I was able to play with it and figure it out. I did what you mentioned by just setting up a webmail inbox and just configure the settings with adding and email account and forwarding all within gmail and just did away with the forward all together on the WA platform. Thank you
See more comments
How do I get my email forwarding to work?
Hey everyone, I setup an email domain to be fowarded to my gmail account but I don't show that it worked when I checking my inbox when sending a test run. Can anyone help? also
whan you send a new mesage from your gmail account you should be able to drop down a box for the sender and select the other emails address.
if not then goto your accounts and check that this has been setup as a sender address - add it if not and you should be able to send from there.
so when you can drop the sender box down you can send yourself a test email
note the dropdown only appears in hte standard view - in the html you will reply to the email and it will apear as sent from your sites address
good luck
phil
Thanks Phil, I was able to figure that out and set that up. However how do I log into my domain email that I own that I setup within the WA platform as I only have it setup as a forward to my gmail account since you cant have the webmail box and a forward at the same time. Please let me know if you have any info on this and thank you for responding.
Michael
Michael, if you setup an email foward it is a virtual email - so you cannot login anywhere.
it is a bit like a redirection.
this is one reason i tend to setup a proper email and import the settings into my gmail - but i can log in on the wa platform if need be.
oh I see, so I can setup the actual webmail box, and then do the settings to access that email account from gmail? if so, how do I go about that coz as of now I have it setup as a forward only.
Nevermind Phil. I was able to play with it and figure it out. I did what you mentioned by just setting up a webmail inbox and just configure the settings with adding and email account and forwarding all within gmail and just did away with the forward all together on the WA platform. Thank you
See more comments
I have an issue with not being able to login in to my email domain here within the WA platform. Can someone please help with this?
Thank you
Then you should contact Site Support.
Easy to do this
Click on Websites on the left and at the bottom of the list you should see Site Support.
Click on that and follow instructions.
Robert
Thank you Robert. I was able to get it handled. Must have been a clitch in the system because it started to work not too soon after. Thank you for your support.
Perhaps you don't have your SSL activated.
Easy to do this.
Click on websites on the left then Site Manager.
Find your site and over on the far right you will see the word Details.
Click on it and scroll down until you see three functions.
Your SSL is one of them.
Activate it and I suggest you activate all three.
If this doesn't fix the issue then contact Support.
Robert
See more comments
Unknown error when logging into my domain email?
I have an issue with not being able to login in to my email domain here within the WA platform. Can someone please help with this?
Thank you
Then you should contact Site Support.
Easy to do this
Click on Websites on the left and at the bottom of the list you should see Site Support.
Click on that and follow instructions.
Robert
Thank you Robert. I was able to get it handled. Must have been a clitch in the system because it started to work not too soon after. Thank you for your support.
Perhaps you don't have your SSL activated.
Easy to do this.
Click on websites on the left then Site Manager.
Find your site and over on the far right you will see the word Details.
Click on it and scroll down until you see three functions.
Your SSL is one of them.
Activate it and I suggest you activate all three.
If this doesn't fix the issue then contact Support.
Robert
See more comments
Does anyone know how to edit a post once it has been published and also how to change the background color from black to white?
Does anyone know how to edit a post once it has been published and also how to change the background color from black to white?
Hello all, So I finished level 1 of the training and in regard to the keyword phrase we were to come up with, I came up with like 6 so am I just to jot them down and add them l
Your keywords are a way to be found by the search engines. When you find a keyword you should write an article based on that KW.
I like to place My keyword in the title of my article and somewhere in my meta description.
Your content itself will be full of keywords so I wouldn’t worry about using the keyword in the article unless you can make it sound natural and unforced
Keyword stuffing is frowned on by S.E
Best of luck
Shannon Kamal
Awesome advice Shannon, thank you such much for getting back to me with an answer. I highly appreciate it.
See more comments
Keyword ideas or add them to content?
Hello all, So I finished level 1 of the training and in regard to the keyword phrase we were to come up with, I came up with like 6 so am I just to jot them down and add them l
Your keywords are a way to be found by the search engines. When you find a keyword you should write an article based on that KW.
I like to place My keyword in the title of my article and somewhere in my meta description.
Your content itself will be full of keywords so I wouldn’t worry about using the keyword in the article unless you can make it sound natural and unforced
Keyword stuffing is frowned on by S.E
Best of luck
Shannon Kamal
Awesome advice Shannon, thank you such much for getting back to me with an answer. I highly appreciate it.
See more comments
Stop using the Enter key except for the end of a paragraph. Just keep typing and let the line endings happen automatically.
Thank you for you response Marion