I will not log out of WA because I forgot my password. When I go under profile I see my user name but the password is not shown to protect me. However I need to retrieve my pass
Another thought; Is it possible that you allowed your browser to save your password and you could go to your browsers advanced password settings and maybe expose the one you used?
I've used the "forgot my password" button before. That will take you to the website you signed in under with instructions.
If you log out and can't remember your password, there's a "Forgot Your Password?" link at the bottom of the WA login form. :) Rich.
Go into websites and hosting. Right next to your website name will be a button called "Details" Click on that and it will take you to your password and other info.
No, I think Veronica means her password for WA, not the one for her website.
Veronica, I would think if you log out and can't log back in because you can't remember your password, there will be a link 'I can't remember my password' or similar and your password will automatically be sent to the email address you signed up with. I can't be absolutely sure of this, but am fairly certain.
Or you could send Kyle a PM.
Sherion,
Internetgranny is correct. I know my website password, just can't recall my WA password in case I log out by mistake. And I need it for another website.
See more comments
I will not log out of WA because I forgot my password. When I go under profile I see my user name but the password is not shown to protect me. However I need to retrieve my pass
Another thought; Is it possible that you allowed your browser to save your password and you could go to your browsers advanced password settings and maybe expose the one you used?
Another thought; Is it possible that you allowed your browser to save your password and you could go to your browsers advanced password settings and maybe expose the one you used?
I've used the "forgot my password" button before. That will take you to the website you signed in under with instructions.
If you log out and can't remember your password, there's a "Forgot Your Password?" link at the bottom of the WA login form. :) Rich.
Go into websites and hosting. Right next to your website name will be a button called "Details" Click on that and it will take you to your password and other info.
No, I think Veronica means her password for WA, not the one for her website.
Veronica, I would think if you log out and can't log back in because you can't remember your password, there will be a link 'I can't remember my password' or similar and your password will automatically be sent to the email address you signed up with. I can't be absolutely sure of this, but am fairly certain.
Or you could send Kyle a PM.
Sherion,
Internetgranny is correct. I know my website password, just can't recall my WA password in case I log out by mistake. And I need it for another website.
See more comments
Can anyone looking at my site
For some reason when I go to your link above it is taking me to sign in page for your site, see MmmmBalf has give advice hope you get it resolved
Looking at your code you have the color set to black using span attributes on each of those lines from "Light type".
If you go into your editor and click on the text tab so you can see the code. Scroll down to where you can see "light type." You'll see the code < span style="color: #000000; font-family: calibri etc
That's setting the color to black, and the font to calibri. On each of those lines you need to delete the span. Delete everything in the < > Make sure you don't delete the < li > You also need to delete end span tag at the end of each line. </ span > (I've added spaces in)
Once you've done that you can make "Light type" bold in the usual manner.
Sorry for the delay in my resonance, I followed someone else directions on another issue and it locked me out of my webpage for the past 15 hours.
I am now back in and clicked on editor - your asking me to click on teat tab (I do not see this tab any where) I am looking an a tone of code so I scrolled down through it looking for "light type" don't see that either. I am lost.
When you edit the page in WP, you have your text window where all the text is and above it the text editing buttons (bold etc.) At the top right of the text window, level with the editing buttons, are 2 tabs, one says Visual and the other Text.
If you are in Visual you should see the page roughly as it will appear in a browser - the text will be correct size and images will be shown etc. This is also called the What You See Is What You Get editor. If you click on text you will be in the plain text and code editor. You will see images as img src code, paragraphs start with < p> etc You should see all of the text that you have written, surrounded by tags.
When you say you clicked on editor - do you mean down the left menu under Appearance? If so that's not where you want to be - you want to edit the page under Pages.
stevejf
Yes that is what I am talking about. It should all be in the gray and if you look close the test is not the same as the wording in gray.
Sorry about that this is the correct link.
http://ridingpatrails.com/biking-equipment/
when you scroll to the bottom you can easily see what I am talking about. I cut and pasted everything from word in the same cut.
The only thing I change once in wordpress was adding the bullets and indents. I made NO CHANGES to the text. And can not make any changes to the text.
Just to clarify. Do you mean how the text in the list is black rather than grey like it is in the paragraphs above it?
MmmmBalf
Thank you, I have had a few days where I just could not be by myself to actually follow your directions. I completed them tonight and now have my page looking the way I want it. Thank you
Hi Veronica,
Do you mean the text under "Biking For Beginners"? It was created with an h1 tag which means it's a large heading tag. When you copy in content from Word you need to use the copy from word facility in your edit menu
It's a little square with a W in it.
If that's not what you mean let me know which page/post it's on. The link you gave will not work for us because it requires us to log into your wp-admin.
When you did your cut and paste from Word did you click on the tab of the editor that says 'text' rather than posting onto the 'visual' tab? that could be the difference because of the formatting Word uses and you have to strip that out. Alternatively, while on the 'visual' tab there is a button with a 'W' on it that will bring up a box for you to paste into. Hope this helped.
See more comments
Can anyone looking at my site
http://ridingpatrails.com/wp-admi
For some reason when I go to your link above it is taking me to sign in page for your site, see MmmmBalf has give advice hope you get it resolved
Looking at your code you have the color set to black using span attributes on each of those lines from "Light type".
If you go into your editor and click on the text tab so you can see the code. Scroll down to where you can see "light type." You'll see the code < span style="color: #000000; font-family: calibri etc
That's setting the color to black, and the font to calibri. On each of those lines you need to delete the span. Delete everything in the < > Make sure you don't delete the < li > You also need to delete end span tag at the end of each line. </ span > (I've added spaces in)
Once you've done that you can make "Light type" bold in the usual manner.
Sorry for the delay in my resonance, I followed someone else directions on another issue and it locked me out of my webpage for the past 15 hours.
I am now back in and clicked on editor - your asking me to click on teat tab (I do not see this tab any where) I am looking an a tone of code so I scrolled down through it looking for "light type" don't see that either. I am lost.
When you edit the page in WP, you have your text window where all the text is and above it the text editing buttons (bold etc.) At the top right of the text window, level with the editing buttons, are 2 tabs, one says Visual and the other Text.
If you are in Visual you should see the page roughly as it will appear in a browser - the text will be correct size and images will be shown etc. This is also called the What You See Is What You Get editor. If you click on text you will be in the plain text and code editor. You will see images as img src code, paragraphs start with < p> etc You should see all of the text that you have written, surrounded by tags.
When you say you clicked on editor - do you mean down the left menu under Appearance? If so that's not where you want to be - you want to edit the page under Pages.
stevejf
Yes that is what I am talking about. It should all be in the gray and if you look close the test is not the same as the wording in gray.
Sorry about that this is the correct link.
http://ridingpatrails.com/biking-equipment/
when you scroll to the bottom you can easily see what I am talking about. I cut and pasted everything from word in the same cut.
The only thing I change once in wordpress was adding the bullets and indents. I made NO CHANGES to the text. And can not make any changes to the text.
Just to clarify. Do you mean how the text in the list is black rather than grey like it is in the paragraphs above it?
MmmmBalf
Thank you, I have had a few days where I just could not be by myself to actually follow your directions. I completed them tonight and now have my page looking the way I want it. Thank you
Hi Veronica,
Do you mean the text under "Biking For Beginners"? It was created with an h1 tag which means it's a large heading tag. When you copy in content from Word you need to use the copy from word facility in your edit menu
It's a little square with a W in it.
If that's not what you mean let me know which page/post it's on. The link you gave will not work for us because it requires us to log into your wp-admin.
When you did your cut and paste from Word did you click on the tab of the editor that says 'text' rather than posting onto the 'visual' tab? that could be the difference because of the formatting Word uses and you have to strip that out. Alternatively, while on the 'visual' tab there is a button with a 'W' on it that will bring up a box for you to paste into. Hope this helped.
See more comments
How do I create a drop down tab? What I want to do is have the person click on a trail name and have the information come up just for that trail? http://ridingpatrails.com/ Lookin
I created a video for you at http://www.trevor-greenfield.com/create-link/
Let me know if this is what you need.
Check out Kyle's training on drop down menus... hope it helps.
https://my.wealthyaffiliate.com/training/wa-affiliate-bootcamp-content-keywords-and-conversions/enhancing-your-website-experience
Tracy, Thank you for the help - However that is not quite what I was looking for...
I have a web page that someone will be viewing in the content there is a list of trail. I want them to be able to click on a trail name and have then takes to information regarding that trail. I guess drop down was not the correct term for me to use.
I haven't used this feature yet, but if you put a link from the trail name to a page with info on that trail, you can do it by the little link icon, highlight the word ''whatever trail'' click on the link icon then put in the URL for the information page, hope that makes sense.
See more comments
How do I create a drop down tab? What I want to do is have the person click on a trail name and have the information come up just for that trail? http://ridingpatrails.com/ Lookin
I created a video for you at http://www.trevor-greenfield.com/create-link/
Let me know if this is what you need.
Check out Kyle's training on drop down menus... hope it helps.
https://my.wealthyaffiliate.com/training/wa-affiliate-bootcamp-content-keywords-and-conversions/enhancing-your-website-experience
Tracy, Thank you for the help - However that is not quite what I was looking for...
I have a web page that someone will be viewing in the content there is a list of trail. I want them to be able to click on a trail name and have then takes to information regarding that trail. I guess drop down was not the correct term for me to use.
I haven't used this feature yet, but if you put a link from the trail name to a page with info on that trail, you can do it by the little link icon, highlight the word ''whatever trail'' click on the link icon then put in the URL for the information page, hope that makes sense.
See more comments
I have posted a photo and written content to my home page. When I view it in the dashboard it looks fine. But when I go on the web page the home page only has the written content.
Sorry, not sure why its not showing up. I'm sure one of the experts will help you shortly, if you haven't figured it out already.
http://ridingpatrails.com/ I am also having issues with labeling photos on my photo page. I have the labeled but it does not show up on the page. thanks for looking
I have the photo on the web site Jaweda2k tole me to list it as a featured photo and it worked. Thank and input on the page would be a help I am just putting the site together.
It worked Thanks, now how do I add test to a list of photos I have on a photo page. I put the text in but when I go onto the site no test is there.
are you asking about adding text to a image? If so I have a training I created that gives some pointers on that as sometimes Wordpress can be a bit finicky about that.
https://my.wealthyaffiliate.com/training/tips-tricks-with-adding-images/overview-of-tips-tricks
See more comments
I have posted a photo and written content to my home page. When I view it in the dashboard it looks fine. But when I go on the web page the home page only has the written content.
Sorry, not sure why its not showing up. I'm sure one of the experts will help you shortly, if you haven't figured it out already.
http://ridingpatrails.com/ I am also having issues with labeling photos on my photo page. I have the labeled but it does not show up on the page. thanks for looking
I have the photo on the web site Jaweda2k tole me to list it as a featured photo and it worked. Thank and input on the page would be a help I am just putting the site together.
It worked Thanks, now how do I add test to a list of photos I have on a photo page. I put the text in but when I go onto the site no test is there.
are you asking about adding text to a image? If so I have a training I created that gives some pointers on that as sometimes Wordpress can be a bit finicky about that.
https://my.wealthyaffiliate.com/training/tips-tricks-with-adding-images/overview-of-tips-tricks
See more comments
Another thought; Is it possible that you allowed your browser to save your password and you could go to your browsers advanced password settings and maybe expose the one you used?