I think I may be missing a step here. When I write something in site content and I haven't finished the post as is often the case, I open the post in the dashboard to find that
Hi Marion and thanks for your response. After posting the question, I got to thinking that because site manager saves the content and after going back to it after closing it down the content remains, that it doesnt show up in the dashbiard post because it hadnt been published.
This is clearly my sticking point. I see the word publish and thought no I dont want this up on my site yet it isnt finished.
So it doesn't actually publish it to the site merely to the posts area in the dashboard. Hmmm perhaps I should have read more about site content usage brfore proceeding. A little ambiguous methinks.
You have a choice. Either finish the post in Site Content before you publish it or publish it and finish writing it in WordPress :)
Why is site content scribblings not showing up in post?
I think I may be missing a step here. When I write something in site content and I haven't finished the post as is often the case, I open the post in the dashboard to find that
Hi Marion and thanks for your response. After posting the question, I got to thinking that because site manager saves the content and after going back to it after closing it down the content remains, that it doesnt show up in the dashbiard post because it hadnt been published.
This is clearly my sticking point. I see the word publish and thought no I dont want this up on my site yet it isnt finished.
So it doesn't actually publish it to the site merely to the posts area in the dashboard. Hmmm perhaps I should have read more about site content usage brfore proceeding. A little ambiguous methinks.
You have a choice. Either finish the post in Site Content before you publish it or publish it and finish writing it in WordPress :)
I've been reading up a bit on SEO plugins and apparently while the all in one SEO we have installed is by far the most used there is an alternative of equal if not better funct
Personally, I prefer all in one.
It is true that the content analysis on yoast can be helpful as a reminder for beginners, but it can also be a bit stressful with the red and green symbols, and sometimes people end up focusing too much on these colors instead of just thinking logically as well.
But as Steve says, a lot of it comes down to personal preferences. I think all in one has better options and is more pleasant to use, but you can always just try to install yoast on a free siterubix test site and test it for yourself to see which one you like the best.
All the best,
Mikael
I've never used Yoast and I've never had a problem ranking posts. It's a matter of personal preference.
Fair enough, i was merely interested in the content analysis option and thought that might be more helpful for beginners. As far as I understand it, it is a kind of keyword search tool that scans the post for such data. Ok we use Jaxxy and maybe a few other methods to collate the keyword harvest and sure it works.
I kinda also see this as a final way of optimising each post too.
People tend to overthink SEO so they like all of the indicators that Yoast provides. In the end, only Google decides what will rank and where it will rank.
So very true Steve, but the thing that bugs me is I would obviously like to get a clearer understanding of what works and what doesn't. I've always tended to dig deeply into any software and tweak here and there. This is what I do to really test the limits of software and quite often break it but maybe that's why I've done beta and alpha testing for years because I'm a tinkerer.
Appreciate your insight Thank you.
Yeah lol! but then this distracts me from what I really need to be focusing on, which is writing content so I'm trying really hard to avoid such temptation. Maybe later down the road when I have things more established.
cheers
See more comments
I've been reading up a bit on SEO plugins and apparently while the all in one SEO we have installed is by far the most used there is an alternative of equal if not better funct
Personally, I prefer all in one.
It is true that the content analysis on yoast can be helpful as a reminder for beginners, but it can also be a bit stressful with the red and green symbols, and sometimes people end up focusing too much on these colors instead of just thinking logically as well.
But as Steve says, a lot of it comes down to personal preferences. I think all in one has better options and is more pleasant to use, but you can always just try to install yoast on a free siterubix test site and test it for yourself to see which one you like the best.
All the best,
Mikael
I've never used Yoast and I've never had a problem ranking posts. It's a matter of personal preference.
Fair enough, i was merely interested in the content analysis option and thought that might be more helpful for beginners. As far as I understand it, it is a kind of keyword search tool that scans the post for such data. Ok we use Jaxxy and maybe a few other methods to collate the keyword harvest and sure it works.
I kinda also see this as a final way of optimising each post too.
People tend to overthink SEO so they like all of the indicators that Yoast provides. In the end, only Google decides what will rank and where it will rank.
So very true Steve, but the thing that bugs me is I would obviously like to get a clearer understanding of what works and what doesn't. I've always tended to dig deeply into any software and tweak here and there. This is what I do to really test the limits of software and quite often break it but maybe that's why I've done beta and alpha testing for years because I'm a tinkerer.
Appreciate your insight Thank you.
Yeah lol! but then this distracts me from what I really need to be focusing on, which is writing content so I'm trying really hard to avoid such temptation. Maybe later down the road when I have things more established.
cheers
See more comments
After adding a number of links internal and external to a post, the internal ones work fine but the external links which are from one of the companies I partnered with open a b
Just an update - The links now work as they should.
I'm not certain why though. I decided to revive an earlier revision of my draft post and create the links exactly as I did earlier and all is well.
This merely suggests there may have been an issue with the draft I was working with. I did create the potentially problematic draft in Site content and when I looked at the post within the dash board area I noticed the last section (bullet points) was missing, so i recreated them and saved the draft.
It was after this I embedded the links into the post and had the problems.
All is well that ends well.
You may try to add it in text format and then update it and go back to visual see if it works.
It was late last night when faced with this issue. In the light ofvthis morning ill take another look. Remember I stated copied directly from a text document and pasted into browser to ensure link worked first which it does. When using the same text from the clipboard and selecting the text in my post that will serve as the link gateway I create the necessary link via the link button and paste accordingly.
You know how long these links can be so one has to be careful to ensure everything is selected before copying. Writing it out manually would be of no benefit. Ive written web sites numerous times using proper authoring software and never experienced this annoyance. I shall apply a little more payience when I revisit this later. Once a solution is discovered I'll share with the community.
HI Howzat and thanks for responding.
I have the affiliate links in a text document.
I copy the one I want to use and open up the draft post in site manager.
I then locate and highlight the piece of text I want to use for the source of the link and click on the link icon.
This throws up an entry box where i paste the copied text.
I then click on the little gear wheel icon to ensure the pasted link is set correctly in the URL box and click on update.
Save the draft and preview the post.
Clicking on the newly created link gives me the result I explained in my question which is weird.
While I am not as familiar with word press as standalone web design software I find it odd that I'm having a problem with this.
See more comments
Why are my external links not working?
After adding a number of links internal and external to a post, the internal ones work fine but the external links which are from one of the companies I partnered with open a b
Just an update - The links now work as they should.
I'm not certain why though. I decided to revive an earlier revision of my draft post and create the links exactly as I did earlier and all is well.
This merely suggests there may have been an issue with the draft I was working with. I did create the potentially problematic draft in Site content and when I looked at the post within the dash board area I noticed the last section (bullet points) was missing, so i recreated them and saved the draft.
It was after this I embedded the links into the post and had the problems.
All is well that ends well.
You may try to add it in text format and then update it and go back to visual see if it works.
It was late last night when faced with this issue. In the light ofvthis morning ill take another look. Remember I stated copied directly from a text document and pasted into browser to ensure link worked first which it does. When using the same text from the clipboard and selecting the text in my post that will serve as the link gateway I create the necessary link via the link button and paste accordingly.
You know how long these links can be so one has to be careful to ensure everything is selected before copying. Writing it out manually would be of no benefit. Ive written web sites numerous times using proper authoring software and never experienced this annoyance. I shall apply a little more payience when I revisit this later. Once a solution is discovered I'll share with the community.
HI Howzat and thanks for responding.
I have the affiliate links in a text document.
I copy the one I want to use and open up the draft post in site manager.
I then locate and highlight the piece of text I want to use for the source of the link and click on the link icon.
This throws up an entry box where i paste the copied text.
I then click on the little gear wheel icon to ensure the pasted link is set correctly in the URL box and click on update.
Save the draft and preview the post.
Clicking on the newly created link gives me the result I explained in my question which is weird.
While I am not as familiar with word press as standalone web design software I find it odd that I'm having a problem with this.
See more comments
Hi,
I added an image on my first post as a featured image and it now has a visible border when viewed online. The original image does not have a border. How can this be r
Hey Peter,
When I want to customize a theme, what I do is Google search for the help. Many times what I am looking for is buried deep within the developer's support forum.
EXAMPLE
how to [name of your theme goes here] remove image border.
If this option requires more than unchecking an option within your theme (adding code) then you should install a child theme BEFORE making this change.
Here is a tutorial to help you if necessary: How To Create A Child Theme in Wealthy Affiliate Using a child theme is the only way to keep your customized changes when updating your theme in the future.
Hope this helps you.
Thanks ill check this out. It does seem odd though and I think it may have something to do with previous site building software ive used which gives one total control over such matters.
Also, I was playing around with site content earlier and after tunning the much praised grammar checker, found that it was not as accurate as is claimed.
Words spell and grammar checker is bad enough but far more accurate than site content.
Hi, I did find a way to remove the annoying grey borders on the featured images which involved adding a small amount of code on the main style sheet and I haven't created a child theme yet but I'm mindful not to update the theme I'm using for the time being.
I have bookmarked the tutorial link regarding creation of Child Theme and taken a look.
Installing the child theme and placing that customizing code on it now could very well save a lot of "hair-pulling" frustration later, when your website could be gaining a lot of traffic.
However that option is entirely up to you. Website themes that are not updated regularly could hurt a website's ranking in search engines too.
Hindsight is such a wonderful thing hey. Operating from a child site about ten minutes after I posted last comment.
Yes Thanks for that it only took a few minutes to sort out easy peasy. You too have a good one further
See more comments
How can I remove a border from a featured image?
Hi,
I added an image on my first post as a featured image and it now has a visible border when viewed online. The original image does not have a border. How can this be r
Hey Peter,
When I want to customize a theme, what I do is Google search for the help. Many times what I am looking for is buried deep within the developer's support forum.
EXAMPLE
how to [name of your theme goes here] remove image border.
If this option requires more than unchecking an option within your theme (adding code) then you should install a child theme BEFORE making this change.
Here is a tutorial to help you if necessary: How To Create A Child Theme in Wealthy Affiliate Using a child theme is the only way to keep your customized changes when updating your theme in the future.
Hope this helps you.
Thanks ill check this out. It does seem odd though and I think it may have something to do with previous site building software ive used which gives one total control over such matters.
Also, I was playing around with site content earlier and after tunning the much praised grammar checker, found that it was not as accurate as is claimed.
Words spell and grammar checker is bad enough but far more accurate than site content.
Hi, I did find a way to remove the annoying grey borders on the featured images which involved adding a small amount of code on the main style sheet and I haven't created a child theme yet but I'm mindful not to update the theme I'm using for the time being.
I have bookmarked the tutorial link regarding creation of Child Theme and taken a look.
Installing the child theme and placing that customizing code on it now could very well save a lot of "hair-pulling" frustration later, when your website could be gaining a lot of traffic.
However that option is entirely up to you. Website themes that are not updated regularly could hurt a website's ranking in search engines too.
Hindsight is such a wonderful thing hey. Operating from a child site about ten minutes after I posted last comment.
Yes Thanks for that it only took a few minutes to sort out easy peasy. You too have a good one further
See more comments
Hey Kyle, I was wondering if advertising WA on the car with either a unique less obvious indicator than an affiliate number would be a good idea? You have probably thought of t
Honestly, you can get as creative as you can be. Just remember to not break any rules, terms, or laws. :D It would be nice to have a specific landing page where people can go and input a code to join without divulging much info about the main website so that you get credit for the referral. This is done in one site I am currently a member of and works great especially for local advertising. :D Good point though!
Hey Peter,
Your question did not get sent to Kyle in a private message. Instead, you shared it in a classroom. Thought it best to let you know rather than simply ignore your question.
When trying to contact either Kyle or Carson, you need to be sure that the option you select offers you a form that is clearly labeled "Contact Kyle or Carson" else your messages will end up back in a classroom again.
If you don't mind my adding my 2¢ worth in answer to your question, you might consider using a URL shortening service like bitly.com, on the ad that you decide to post on the side of a vehicle.
In this way, it may be easier for a passerby to capture the complete URL quickly enough ...AND... it would be an easy means of your being able to track how many of those who see that ad that actually typed the URL in and visited the it.
Hope this helps you.
Yep I tealised my missive but it doesnt matter it was late and id had a looongg day. I hear your suggestion will investigate. Just wanted to know if this had been done and/or if allowed to do this primarily. Yes it would have to be something shorter but also something that would intrigue interest enough for people to take note.
Cheers
Peter
See more comments
Would another form of promoting wa be possible?
Hey Kyle, I was wondering if advertising WA on the car with either a unique less obvious indicator than an affiliate number would be a good idea? You have probably thought of t
Honestly, you can get as creative as you can be. Just remember to not break any rules, terms, or laws. :D It would be nice to have a specific landing page where people can go and input a code to join without divulging much info about the main website so that you get credit for the referral. This is done in one site I am currently a member of and works great especially for local advertising. :D Good point though!
Hey Peter,
Your question did not get sent to Kyle in a private message. Instead, you shared it in a classroom. Thought it best to let you know rather than simply ignore your question.
When trying to contact either Kyle or Carson, you need to be sure that the option you select offers you a form that is clearly labeled "Contact Kyle or Carson" else your messages will end up back in a classroom again.
If you don't mind my adding my 2¢ worth in answer to your question, you might consider using a URL shortening service like bitly.com, on the ad that you decide to post on the side of a vehicle.
In this way, it may be easier for a passerby to capture the complete URL quickly enough ...AND... it would be an easy means of your being able to track how many of those who see that ad that actually typed the URL in and visited the it.
Hope this helps you.
Yep I tealised my missive but it doesnt matter it was late and id had a looongg day. I hear your suggestion will investigate. Just wanted to know if this had been done and/or if allowed to do this primarily. Yes it would have to be something shorter but also something that would intrigue interest enough for people to take note.
Cheers
Peter
See more comments
Glad to hear you got this one