Why are there no stats at all on my site seed? Optimization is good it said
There are no site speed stats in my affiliate marketing site, either. Previously, there were some great results. Hopefully they will return. I do have another site but didn't check it out as I expect it will be without stats too.
Hey Val,
Do you have any idea why? They were all good yesterday, go figure, maybe it's a technical problem, I sure hope so. Scared the poop out of me, :))
I think it's just glitch Riley. I'm sure it will come right soon. Various glitches occur from time to time, but they all get mended :)
See more comments
No site speed stats at all on my website, was fine before?
Why are there no stats at all on my site seed? Optimization is good it said
Hi Joe
Thanks for your help. I am looking at the stats in the site manager area where it says view details.
I tried the link you gave and it would not load when I entered my URL
That's curious--I checked my three sites and got results as did a few members...see the comments on my post.
There are no site speed stats in my affiliate marketing site, either. Previously, there were some great results. Hopefully they will return. I do have another site but didn't check it out as I expect it will be without stats too.
Hey Val,
Do you have any idea why? They were all good yesterday, go figure, maybe it's a technical problem, I sure hope so. Scared the poop out of me, :))
I think it's just glitch Riley. I'm sure it will come right soon. Various glitches occur from time to time, but they all get mended :)
See more comments
Is there a way to have my font stay the same throughout when writing content, rather than each paragraph having to change back?
Hi, Riley, Click on Appearance>Customize. Now you should see a list: Site Title, Header, Colors, etc. Scroll down and you should see Additional CSS or Add CSS. If there isn't one you will need to install and activate a css plugin like Simple Custom CSS. Now place the code in the box provided as per Marion's instructions.
You can also change the color of fonts; headers; line height, the space between lines of text; paragraph spacing; and horizontal rules are just a few. Knowing some basic css and html can change the whole appearance of your site and make it really unique. Hope this helps. If I can help any further, give me a shout.
Aha, thanks so much, I was following Marions' instructions over & over :) however, there was only a plain white tall wide box, nowhere did it say add codes or similar?
So I've been stuck on that... went ahead and typed my article again with the font I wanted, but really want a permanent solution.Thanks so much for your help, will try adding plug ~
stay humble & kind,
riley
Hi, Riley, if you looked in Customize and clicked on Additional CSS and saw a tall white box, that is where you paste your code. Some have */Place your additional css here*/ others are blanks, it doesn't matter, both work.
Now you need to create your code, you can copy this one if you wish, paste into additional css and just change the attributes to suit:
p {
font-family: arial, verdana, sans-serif;
font-size: 18px;
line-height: 1.5;
color: #333333;
}
You can change the line height by increasing or decreasing the increments: 1.0, 1-9, 2.0 or use pixels.
Now click on Publish then refresh page or post. Hope this helps, if I can help any further, give me a shout. Best wishes.
Is this a Site Content issue or a WordPress issue? Here's a simple solution to set the font for your entire website https://marionblackonline.com/css-change-font-family-site-wide/
Hi Again, Marion,
I followed your steps and was able to access the area for adding the codes, however, there is no place there where I can place the codes?? There is just a white box with no instructions.
I hate to seem stupid and have been trying since I received your link. If you can explain exactly where or what step I'm missing, sure would appreciate it.
stay humble & kind,
riley
The code is within the text under the video. Choose which font you want to use and copy the appropriate code. Then paste it into that empty white box. Click on Publish when you've finished.
If you are talking about the font size changing within SiteContent just hit "save". If you are talking about one platform to another then I have the same problem. There doesn't seem to be anyway I solve the issues.
Tried and true
Elaine
By default in site content, the font stay the same until you select them for your heading. However, sometimes all the fonts changed to the same as heading and I have to change them back. There might be a small bug in the software. I usually save and exit. That helps resolve my problem.
See more comments
How to make font stay the same when writing content?
Is there a way to have my font stay the same throughout when writing content, rather than each paragraph having to change back?
Hi, Riley, Click on Appearance>Customize. Now you should see a list: Site Title, Header, Colors, etc. Scroll down and you should see Additional CSS or Add CSS. If there isn't one you will need to install and activate a css plugin like Simple Custom CSS. Now place the code in the box provided as per Marion's instructions.
You can also change the color of fonts; headers; line height, the space between lines of text; paragraph spacing; and horizontal rules are just a few. Knowing some basic css and html can change the whole appearance of your site and make it really unique. Hope this helps. If I can help any further, give me a shout.
Aha, thanks so much, I was following Marions' instructions over & over :) however, there was only a plain white tall wide box, nowhere did it say add codes or similar?
So I've been stuck on that... went ahead and typed my article again with the font I wanted, but really want a permanent solution.Thanks so much for your help, will try adding plug ~
stay humble & kind,
riley
Hi, Riley, if you looked in Customize and clicked on Additional CSS and saw a tall white box, that is where you paste your code. Some have */Place your additional css here*/ others are blanks, it doesn't matter, both work.
Now you need to create your code, you can copy this one if you wish, paste into additional css and just change the attributes to suit:
p {
font-family: arial, verdana, sans-serif;
font-size: 18px;
line-height: 1.5;
color: #333333;
}
You can change the line height by increasing or decreasing the increments: 1.0, 1-9, 2.0 or use pixels.
Now click on Publish then refresh page or post. Hope this helps, if I can help any further, give me a shout. Best wishes.
Is this a Site Content issue or a WordPress issue? Here's a simple solution to set the font for your entire website https://marionblackonline.com/css-change-font-family-site-wide/
Hi Again, Marion,
I followed your steps and was able to access the area for adding the codes, however, there is no place there where I can place the codes?? There is just a white box with no instructions.
I hate to seem stupid and have been trying since I received your link. If you can explain exactly where or what step I'm missing, sure would appreciate it.
stay humble & kind,
riley
The code is within the text under the video. Choose which font you want to use and copy the appropriate code. Then paste it into that empty white box. Click on Publish when you've finished.
If you are talking about the font size changing within SiteContent just hit "save". If you are talking about one platform to another then I have the same problem. There doesn't seem to be anyway I solve the issues.
Tried and true
Elaine
By default in site content, the font stay the same until you select them for your heading. However, sometimes all the fonts changed to the same as heading and I have to change them back. There might be a small bug in the software. I usually save and exit. That helps resolve my problem.
See more comments
When I log onto my website it freezes after just a few seconds. I am unable to edit post and this has been two days now ~ kept hoping issue would resolve ~
Clear cookies, cache, history, temp files and disable your firewall .You could have a viruses download CC cleaner, It is free and it won't work on windows 10. IT could be you do not have enough memory Ram to support the program. Random-access memory
Random-access memory Random -access memory is a form of computer data storage that stores data and machine code currently being used. A random-access memory device allows data items to be read or written in almost the same amount of time irrespective of the physical location of data inside the memory. In contrast, with other direct-access data storage media such as hard disks, CD-RWs, DVD-RWs and the older magnetic tapes and drum memory, the time required to read and write data items varies significantly depending on their physical locations on the recording medium, due to mechanical limitations such as media rotation speeds and arm movement.
SiteSupport will be your best action. I would love to hear their answer in case I am ever faced with this problem.
I was going to suggest rebooting your system, but that's already been covered. Check your system information, it may be that you have run out of memory on your computer. Hope this helps.
Xav
I would absolutely be contacting support for this:
https://my.wealthyaffiliate.com/websites/support
It may be an issue with your device/ browser, but it's worth checking with support. They normally respond within minutes.
Hi, Riley, if you get the message your browser isn't responding, make sure you have the latest version.
Try Pressing CTRL+ALT+DELETE then Task Manager, this will show you if your browser, or any other program, isn't responding. If this is the case click on End Task, this should clear the website.
Now look to see is there are any updates to your present browser, update and restart. If the problem still exists try another browser, just make sure you make it your default browser. You may also try deleting your browser and internet cache. Hope this helps.
If you can browse other sites without any problems, either restart your browser or computer, but if that fails, contact support. If you' ve recenty installed any new plugins, disable them to see if these are causing your problem.
I would try using a different browser, like firefox. See if that helps if the situation continues after a restart.
See more comments
Website freezing after a few seconds ?
When I log onto my website it freezes after just a few seconds. I am unable to edit post and this has been two days now ~ kept hoping issue would resolve ~
Clear cookies, cache, history, temp files and disable your firewall .You could have a viruses download CC cleaner, It is free and it won't work on windows 10. IT could be you do not have enough memory Ram to support the program. Random-access memory
Random-access memory Random -access memory is a form of computer data storage that stores data and machine code currently being used. A random-access memory device allows data items to be read or written in almost the same amount of time irrespective of the physical location of data inside the memory. In contrast, with other direct-access data storage media such as hard disks, CD-RWs, DVD-RWs and the older magnetic tapes and drum memory, the time required to read and write data items varies significantly depending on their physical locations on the recording medium, due to mechanical limitations such as media rotation speeds and arm movement.
SiteSupport will be your best action. I would love to hear their answer in case I am ever faced with this problem.
I was going to suggest rebooting your system, but that's already been covered. Check your system information, it may be that you have run out of memory on your computer. Hope this helps.
Xav
I would absolutely be contacting support for this:
https://my.wealthyaffiliate.com/websites/support
It may be an issue with your device/ browser, but it's worth checking with support. They normally respond within minutes.
Hi, Riley, if you get the message your browser isn't responding, make sure you have the latest version.
Try Pressing CTRL+ALT+DELETE then Task Manager, this will show you if your browser, or any other program, isn't responding. If this is the case click on End Task, this should clear the website.
Now look to see is there are any updates to your present browser, update and restart. If the problem still exists try another browser, just make sure you make it your default browser. You may also try deleting your browser and internet cache. Hope this helps.
If you can browse other sites without any problems, either restart your browser or computer, but if that fails, contact support. If you' ve recenty installed any new plugins, disable them to see if these are causing your problem.
I would try using a different browser, like firefox. See if that helps if the situation continues after a restart.
See more comments
I have tried every method of verifying my sites with no success, giving me major grief, would appreciate your help.
Mucho Thanks,
rileyroman
Hi Riley have you tried going into the AIOSEO, then general settings and if you scroll down to where the Google webmasters verification is there is a box for bing too.
May be worth trying if you haven’t already. Xxx
Bing Webmaster tools may help with this Riley! https://www.webnots.com/add-and-verify-your-site-in-bing-webmaster-tools/
rileyroman, if that fails go here: Simple Verification of Google Webmaster tools for Beginners
See more comments
Having trouble verifying my websites?
I have tried every method of verifying my sites with no success, giving me major grief, would appreciate your help.
Mucho Thanks,
rileyroman
Hi Riley have you tried going into the AIOSEO, then general settings and if you scroll down to where the Google webmasters verification is there is a box for bing too.
May be worth trying if you haven’t already. Xxx
Bing Webmaster tools may help with this Riley! https://www.webnots.com/add-and-verify-your-site-in-bing-webmaster-tools/
rileyroman, if that fails go here: Simple Verification of Google Webmaster tools for Beginners
See more comments
I have watched the video on this lesson repeatedly, still am not getting how to add a WA video to my post ???
Here is the image, (right click and save as..) upload it to your website and attach the affiliate link on top to the lesson to it
Hi Loes, thank you for responding,
will this video have the "how to choose a niche" that's what I'm trying to insert into my post,
Good question, Riley. And Marion is spot on here. You just need to take a screenshot of the video you want to use in your post, and insert that screenshot as an image in your post. The only difference with this image is, you will insert your affiliate link into the image so that when people click the video image, it takes them to the actual video page in WA. And if they sign up, you get the credit.
Are you familiar with how to take screenshots and insert images?
I watched a couple of training videos, however, when I tried to take the screenshot, "prt sc" nothing happened, did not download to my laptop :(
I believe for a PC it's ( Ctrl + Print Screen ) and I know myself I use a Mac so it's ( command + shift + 3 OR command + shift + 4 allows you to take the screenshot wherever you want, not just the whole page).
If you're not sure how to do this, I recommend 'Googling it' or better yet 'Youtubing it' to see how it's done for whatever laptop you're using (Windows PC or Apple Mac).
With Windows 10 just use your snipping tool and save it. It will be a jpeg file which will upload to your media library and into your site just fine.
Take a screenshot of the video and link to the page it's on using your affiliate link from the top of the page.
See more comments
I have watched the video on this lesson repeatedly, still am not getting how to add a WA video to my post ???
Here is the image, (right click and save as..) upload it to your website and attach the affiliate link on top to the lesson to it
Hi Loes, thank you for responding,
will this video have the "how to choose a niche" that's what I'm trying to insert into my post,
Good question, Riley. And Marion is spot on here. You just need to take a screenshot of the video you want to use in your post, and insert that screenshot as an image in your post. The only difference with this image is, you will insert your affiliate link into the image so that when people click the video image, it takes them to the actual video page in WA. And if they sign up, you get the credit.
Are you familiar with how to take screenshots and insert images?
I watched a couple of training videos, however, when I tried to take the screenshot, "prt sc" nothing happened, did not download to my laptop :(
I believe for a PC it's ( Ctrl + Print Screen ) and I know myself I use a Mac so it's ( command + shift + 3 OR command + shift + 4 allows you to take the screenshot wherever you want, not just the whole page).
If you're not sure how to do this, I recommend 'Googling it' or better yet 'Youtubing it' to see how it's done for whatever laptop you're using (Windows PC or Apple Mac).
With Windows 10 just use your snipping tool and save it. It will be a jpeg file which will upload to your media library and into your site just fine.
Take a screenshot of the video and link to the page it's on using your affiliate link from the top of the page.
See more comments
Where are you looking at site speed? You might check here: Mobile Site Speed
Hi Joe
Thanks for your help. I am looking at the stats in the site manager area where it says view details.
I tried the link you gave and it would not load when I entered my URL
That's curious--I checked my three sites and got results as did a few members...see the comments on my post.