M
I made a comment on the discussion thread for one of Jay's Friday webinars. I'd like to turn off notifications for that thread (Sorry, Jay.) but I can't find any option
You can use the little cog on top, and click on mute the discussion, but sometimes I have noticed this doesn't do the job, I once deleted my comment, because I went crazy from all the notifications keep coming in
The way I do it is under the notification tab (the globe at the top of the page). Select the message, then there is an action button, click that and select ‘remove from discussion ‘.
You are right, it's not there, it's only on the normal blogs.
I think you have to delete your comment to get rid of it
I hope that's not the case. I didn't want to deleye the comment since my comment answered another member's question.
See more comments
Is it possible to use "mute discussion" on a wa webinar?
M
I made a comment on the discussion thread for one of Jay's Friday webinars. I'd like to turn off notifications for that thread (Sorry, Jay.) but I can't find any option
Thanks for asking this question. Due to my slow internet speed I often get sound and discussion with cut-up video. This solution may help to pick up clear video and sound. Like points in the discussion...When my internet is up to par.
You can use the little cog on top, and click on mute the discussion, but sometimes I have noticed this doesn't do the job, I once deleted my comment, because I went crazy from all the notifications keep coming in
The way I do it is under the notification tab (the globe at the top of the page). Select the message, then there is an action button, click that and select ‘remove from discussion ‘.
You are right, it's not there, it's only on the normal blogs.
I think you have to delete your comment to get rid of it
I hope that's not the case. I didn't want to deleye the comment since my comment answered another member's question.
See more comments
On various occasions, I've muted discussion threads that have moved off into other areas than those that I had commented on. From that point, I no longer get notificatiions of
Hey Bob, great question! I was wondering the same thing. And your thread just answered it. Appreciate it @pmindra
Brother Bobb Barr.
I do not know you yet.
It seems that you are having some continued challenges
There are no challenges for that..
Thank you for inviting me to be a part of your network I graciously accept by following yo back
I have been here since May, 2016.
Bob,
How can I help?
Kindest ragrds,
Paul.
.
It was just a simple question about the details of muting discussions, not any sort of challenge.
My question was about WA discussion threads, not wordpress sites. (As far as I know, there is no mute function in wordpress.)
Hi, Bob.
Still not completely sure.
I have not had any issues using the WA dicussion thread or even using the WP for comments, communication, etc...
I might be missing out on something here.
Let me know.
Kindest regards,
Paul.
I think that you're overcomplicating things by mixing wordpress with WA regarding my question -- The entire question is about the "Mute" function on WA discussion threads and has nothing at all to do with wordpress commenting.
I had been thinking (hoping?) that a direct reply to a post of mine on a muted thread should unmute the discussion. Moritz has confirmed that is not the case.
Once you have removed yourself from a discussion you won't get any notifications anymore.
So you would have to check manually whether someone replied to your comment.
Only if you comment on it again will you receive notifications.
That's too bad -- I've probably muted dozens of threads over the years. There's no way in the world that I'm going back to check them manually.
Exactly -- I really don't need to be notified for a lot of those innumerable, repetitive posts. :=) It would be nice, though, to get a notification if someone directly replies to one of my posts.
See more comments
Does a reply unmute a discussion?
On various occasions, I've muted discussion threads that have moved off into other areas than those that I had commented on. From that point, I no longer get notificatiions of
Hey Bob, great question! I was wondering the same thing. And your thread just answered it. Appreciate it @pmindra
Brother Bobb Barr.
I do not know you yet.
It seems that you are having some continued challenges
There are no challenges for that..
Thank you for inviting me to be a part of your network I graciously accept by following yo back
I have been here since May, 2016.
Bob,
How can I help?
Kindest ragrds,
Paul.
.
It was just a simple question about the details of muting discussions, not any sort of challenge.
My question was about WA discussion threads, not wordpress sites. (As far as I know, there is no mute function in wordpress.)
Hi, Bob.
Still not completely sure.
I have not had any issues using the WA dicussion thread or even using the WP for comments, communication, etc...
I might be missing out on something here.
Let me know.
Kindest regards,
Paul.
I think that you're overcomplicating things by mixing wordpress with WA regarding my question -- The entire question is about the "Mute" function on WA discussion threads and has nothing at all to do with wordpress commenting.
I had been thinking (hoping?) that a direct reply to a post of mine on a muted thread should unmute the discussion. Moritz has confirmed that is not the case.
Once you have removed yourself from a discussion you won't get any notifications anymore.
So you would have to check manually whether someone replied to your comment.
Only if you comment on it again will you receive notifications.
That's too bad -- I've probably muted dozens of threads over the years. There's no way in the world that I'm going back to check them manually.
Exactly -- I really don't need to be notified for a lot of those innumerable, repetitive posts. :=) It would be nice, though, to get a notification if someone directly replies to one of my posts.
See more comments
I've recently seen advertising for an SEO program called SeoPOP. (I'm not sure if this is a new program or a renaming of some existing one.) While it's fairly cheap (about $20)
Hi Bob, I've never heard of it but I would be highly skeptical. Companies like that typically rip you off.
Hey Bob,
They appear to be a web development company trying to get business for several different things, from website development to video marketing. There are no testimonies, so I would assume they are new in the marketplace.
Hope that helps you.
See more comments
Anyone have experience with seopop?
I've recently seen advertising for an SEO program called SeoPOP. (I'm not sure if this is a new program or a renaming of some existing one.) While it's fairly cheap (about $20)
Hi Bob, I've never heard of it but I would be highly skeptical. Companies like that typically rip you off.
Hey Bob,
They appear to be a web development company trying to get business for several different things, from website development to video marketing. There are no testimonies, so I would assume they are new in the marketplace.
Hope that helps you.
See more comments
Earlier this morning, I replied to a question which, at the time, had no other responses displayed. On returning to the same question a moment ago, I saw that there actually wer
I can only see your reply there which is different from what others posted.
I suppose it could mean you had that page open and did not refresh the page before you added your post. ~Jude
I'm pretty sure that I refreshed. At this point, there are nine comments on the thread. The two that I was referring to were from MarineMom and ngraddon at the bottom of the page.
If it keeps happening, post again. I have my browser set to clear my computer cache each time I close the browser. Not sure if that has anything to do with anything, just thought I would mention it. ~Jude
I would not be concerned we all live in different time zones so maybe the blog reached you at a different time the main thing is you where there to help all the best
Thanks but I'm not sure that time zones really have anything to do with this issue. Regardless of the time zone that they're posted from, WA's forum software displays people's comments as they are made.
Your comment is currently marked "about an hour ago". An hour ago for me was 12:45PM (US west coast time) even though the time you made the comment may have been different in your time zone.
I run into the occasional glitch with what you just mentioned and I also get some duplicate emails as well.
Thanks. This is (I believe) the first time that I've seen it happen.
While two people posting at the same time certainly wouldn't see each others' replies, I would have expected that posts made more than 15 minutes before mine would have shown up.
Just like when I do get a duplicate email it happens a day later when I have 50 -100 new ones.
So your right about how weird the timing is.
See more comments
Wa thread replies not appearing?
Earlier this morning, I replied to a question which, at the time, had no other responses displayed. On returning to the same question a moment ago, I saw that there actually wer
I can only see your reply there which is different from what others posted.
I suppose it could mean you had that page open and did not refresh the page before you added your post. ~Jude
I'm pretty sure that I refreshed. At this point, there are nine comments on the thread. The two that I was referring to were from MarineMom and ngraddon at the bottom of the page.
If it keeps happening, post again. I have my browser set to clear my computer cache each time I close the browser. Not sure if that has anything to do with anything, just thought I would mention it. ~Jude
I would not be concerned we all live in different time zones so maybe the blog reached you at a different time the main thing is you where there to help all the best
Thanks but I'm not sure that time zones really have anything to do with this issue. Regardless of the time zone that they're posted from, WA's forum software displays people's comments as they are made.
Your comment is currently marked "about an hour ago". An hour ago for me was 12:45PM (US west coast time) even though the time you made the comment may have been different in your time zone.
I run into the occasional glitch with what you just mentioned and I also get some duplicate emails as well.
Thanks. This is (I believe) the first time that I've seen it happen.
While two people posting at the same time certainly wouldn't see each others' replies, I would have expected that posts made more than 15 minutes before mine would have shown up.
Just like when I do get a duplicate email it happens a day later when I have 50 -100 new ones.
So your right about how weird the timing is.
See more comments
I am unable to locate a list of pending training requests. Is that feature still available? Kyle mentioned a request list in an article about creating training but there's no bu
Thank you all for your responses. It does seem that this feature is currently unavailable. (At least it wasn't my inability to navigate WA was the problem.) Perhaps it will be restored at some point in the future. As an alternative, I'll start looking through the unanswered questions in the classrooms for training ideas.
Thanks again, Bob
You can look at the questions being asked and then consider them as inspiration for new training. Just a thought. ~Marion
I've looked for it too, to provide inspiration and to help those in need. It seems that for some reason it's no longer there. Perhaps too many people provided training on the one subject - I can't think of any other reason for taking it down. ~Marion
Yup, just to confirm - that no longer exists. That was around a while ago, but they've stopped that, no sure why.
I have not seen anywhere that we can submit a request for a certain training. Great thought though. My 3 month mark is coming and I had a few ideas but didn't want to repeat something that had been done multiple times.
BUT, on the other hand, sometimes a different way of explaining how to do something can help someone. :)
I'm really confused on this. It appears from Kyle's lessons on creating training that there's supposed to be a capability that allows you to request training and also to view the training requests that others have made. The page linked in Kyle's lesson, though, returns a 404 (not found) error.
I saw that too. Maybe send him a message and see if it was removed or if there is a new location? Let me know if you do please. :)
I agree with you, Angela, sometimes a different way of explaining something makes all the difference in the world!! Thanks for mentioning that:)
Wendy:)
I'm specifically looking for a list of topics for which people have requested training to be made. My thought was that those requests would be the best place to get ideas on where to get started on creating training. At this point, it appears that feature is no longer available.
Hi The Training area is for when you make a training video or tutorial. You can submit after 3 mos Membership. All other training is on left side under training.
Much Success.
Jean '
That training tab is for you when you start making your own training. If you are looking for training all you have to do is. At the top of your profile page is a search field that says ned help name? Ask your question here. Now start typing what you are looking for and training will be in the drop down menu. I hope this is what you are looking for.
Good luck
Tommy
See more comments
How do I find training requests?
I am unable to locate a list of pending training requests. Is that feature still available? Kyle mentioned a request list in an article about creating training but there's no bu
Thank you all for your responses. It does seem that this feature is currently unavailable. (At least it wasn't my inability to navigate WA was the problem.) Perhaps it will be restored at some point in the future. As an alternative, I'll start looking through the unanswered questions in the classrooms for training ideas.
Thanks again, Bob
You can look at the questions being asked and then consider them as inspiration for new training. Just a thought. ~Marion
I've looked for it too, to provide inspiration and to help those in need. It seems that for some reason it's no longer there. Perhaps too many people provided training on the one subject - I can't think of any other reason for taking it down. ~Marion
Yup, just to confirm - that no longer exists. That was around a while ago, but they've stopped that, no sure why.
I have not seen anywhere that we can submit a request for a certain training. Great thought though. My 3 month mark is coming and I had a few ideas but didn't want to repeat something that had been done multiple times.
BUT, on the other hand, sometimes a different way of explaining how to do something can help someone. :)
I'm really confused on this. It appears from Kyle's lessons on creating training that there's supposed to be a capability that allows you to request training and also to view the training requests that others have made. The page linked in Kyle's lesson, though, returns a 404 (not found) error.
I saw that too. Maybe send him a message and see if it was removed or if there is a new location? Let me know if you do please. :)
I agree with you, Angela, sometimes a different way of explaining something makes all the difference in the world!! Thanks for mentioning that:)
Wendy:)
I'm specifically looking for a list of topics for which people have requested training to be made. My thought was that those requests would be the best place to get ideas on where to get started on creating training. At this point, it appears that feature is no longer available.
Hi The Training area is for when you make a training video or tutorial. You can submit after 3 mos Membership. All other training is on left side under training.
Much Success.
Jean '
That training tab is for you when you start making your own training. If you are looking for training all you have to do is. At the top of your profile page is a search field that says ned help name? Ask your question here. Now start typing what you are looking for and training will be in the drop down menu. I hope this is what you are looking for.
Good luck
Tommy
See more comments
Thanks for asking this question. Due to my slow internet speed I often get sound and discussion with cut-up video. This solution may help to pick up clear video and sound. Like points in the discussion...When my internet is up to par.